lattrommi

How did you list your hardware like that? Where it shows the key specifications for each part as bullet points, not the bullet points though, if that makes sense. I know how to make bullets, I mean the data.

Was is generated with a script or did you copy and paste individual part stats from their website specs or some other way?

I have a few ways to generate info, like with inxi or searching pcpartpicker, but there often there is not enough info, important info that is missing, far too much info about stuff I don’t care about or I have to spend a lot of time searching for specific data and have to copy and paste each feature for each part individually which can be too time consuming.

What you have shows pretty much exactly what I would like, so I could easily share when needed.

The term for combining their computational power is “concurrent computing”, “parallel computing” or “distributed computing” which aren’t really all exactly the same but i can’t find distinctions betwen them that are well defined. making them all accesible in one place is something i want to do as well but i get distracted easily and haven’t made much progress.

KVM is an abbreviation that means ‘keyboard video mouse’ which also might be something to look into but it can be confusing as it also is an abbreviation for ‘kernel virtual machine’ which also might be related but that’s as far as i got mostly.

i believe you can create a local network if you have a router/hub/switch device with multiple ethernet ports. if all the devices have wifi you should be able to connect through that, using something like jellyfin or maybe proxmox. wish i knew more and could help, hopefully you get better advice because i want to do the same or something similar.

I probably should have used ‘smaller chips’ instead. another idea would be using ‘thinner phones’ or ‘lighter phones’. i was a weird writing headspace when i wrote that and liked the flow of going from ‘bigger’ to ‘smaller’.

That layout is very similar to my own although I’m using KDE. I’d share a screenshot but it would be hard to see since I’m using 3 monitors and one is an ultrawide, plus 4 virtual desktops, so screenshots don’t do it any justice.

In addition, it would be useful to have a dead mans switch function as well. For example, it uploads the livestream to a private server and a timer starts for a predetermined amount of time. The uploader has to enter a passkey or do a mfa or some similar security mechanism to stop the timer before it runs out. If it does run out or too many incorrect attempts are made, the uploaded video gets forwarded to a list of contacts, created by the video taker. Perhaps to a bunch of press contacts, civil rights groups, family members, next of kin or maybe a lawyer in the event of an incarceration.

Here in America, they might also shoot the camera, you know, in self defense.

Bigger monitors, smaller phones, higher color depth, lower latencies, customizable window decorations, chronal themes, AI, blockchain, more devices, trackers, architectures, platforms, malwares, internet protocols, programming languages, human languages, ads, ads, ads, ads, doom, power saving, content, content moderation and I’m sure there’s plenty more reasons that might contribute to the growth.

Not saying I like or want all those things, simply that they might be contributing to size increases. Part of me wishes we could go back, then i fire up windows xp pro sp3 on an eee pc netbook i have that miraculously still works and i remember why i prefer to stay in the present, at least until AI kills us all.

Not IT though, I’m just a guy.

I want to say I’m glad you asked this and thank you for asking. In this day and age there are a lot of valid concerns for privacy and anonymity and the result is that people do not share how their system(s) work, not openly or very often. I’m still fairly new to Linux (3.5 years) and at times, I feel like I am doing everything wrong and that there is probably a better way. Posts like these help me learn about possible improvements or mistakes I might have made.

I previously used Vorta with Borgbackup locally, automatically backing up my Home (sans things like .cache and .mozilla) to a secondary internal drive every other day. I also would manually back up a smaller set of important documents (memes and porn #joke) to a USB flash drive, to keep on my person, which also would be copied across several cloud storage providers (dropbox, mega, proton), depending on how much space their free versions provided, with items removed according to how much I trusted the provider.

Then I built a new system. In the process of setting it all up, I had a few hiccups. It took longer than I expected to have a stable system. That was over a year ago (stat / …Birth: 2024-02-05 04:20:53…) and I still haven’t gotten around to setting up any backup system on it. I want to rethink my old solution and this post is useful for learning about the options available. It’s also a reminder to get it done before it is too late. Where I live, tornado season in starting. I lost a lot in 2019 after my city had 4 tornados in one day.

If you are technically inclined, there’s QGIS. It’s a steep learning curve but it is capable of doing ANYTHING as far as maps are concerned. Okay, maybe not anything, I admit it’s above my skill level to use effectively. You can import data sets with it, effectively it’s more of a map aggregation and editing tool. It’s far more capable than OSM and you can work offline once the data sets are imported.

There’s also Marble, not the same thing as the other suggestion I see commented. It’s got a version for QT and GTK and some appimages out there. It’s not as polished. In fact, it’s kind of like MS Encarta Atlas, just not really modern. It has a bit of the ‘old internet’ feel to it, if that makes sense.

Excellant write up, thank you.

I’m not exactly sure what ‘opinionated’ means in terms of software, could you (or anyone who sees this) define it?

i go to https://www.timeanddate.com/astronomy/night/ which is not really an app and it can be a bit wonky at times but it works better than every mobile app i’ve seen.

the desktop version of stellarium is the only worthwhile open source program i know about.

i think qgis might have the ability to do everything you require, however the learning curve is somewhat steep.

it allows you to import data from various maps, including openstreetmap, NASA and many more.

i believe there are free/open source topographic layers that can be imported or ways to add specific data.

it can draw layers, lines and shapes on top of each other with varying translucency and colors.

it can show non-mercator map projections such as stereographic, othrographic or even more obscure ones like the waterman butterfly or some of the ones from the list at the bottom of this page: http://www.quadibloc.com/maps/mapint.htm

if you are doing this for a fantasy world map and not earth, it might add even more difficulty but i’ve read people on forums claim they could do it, using another program with qgis and on windows only. i don’t recall much else since the windows requirement was a block for me. it’s probably possible to create the shapefile from scratch.

it has the ability to customize aspects of maps and mapped datum in many more ways that i am incapable of properly explaining, describing, using or understanding. i also have cognitive/developmental disorders, so it might be easier for others, however for me, it’s a map creation program i get lost trying to use.

There isn’t anything you need to know. It’s the opposite actually. You can now forget about graphics drivers entirely if you want. Unless it’s like, a job or hobby or something.

I’ll throw in my vote for Manjaro because while it’s not perfect, it hits all of OP’s points nicely.

• arch based
• hard to break (but not impossible)
• biased a little towards Gnome but runs KDE and XFCE great too
• uses a curated rolling release

The last point is the most important. Rolling release means it updates regularly, so your packages will be mostly up to date. Curated means they do testing in an unstable repository. If an update breaks something, those changes aren’t pushed to stable.

I ended up with it after trying other distros but having trouble with my nVidia card. Manjaro’s MHWD tool installed their drivers easily (although slightly confusing with its unnecessary checkboxes) and more recently, I’ve upgraded to AMD and never had a single issue.

It’s not perfect but almost every issue I’ve had was located between the keyboard and the chair.

I am using Manjaro as well.

Are there Debian apps that you want to run but are unable to because Manjaro is Arch-based? I have read that it is not recommended to install programs compiled for Debian, that it is difficult to run them. Using a virtual machine is the recommended way to use them. Asking just in case but I do not think this is what you want.

Computers can only run one operating system at a time, unless you use virtual machines and hypervisors. Most operating systems are launched after the system uses a bootloader to get the system ready for the operating system. This is usually done by the BIOS/UEFI/firmware starting a bootloader, which then launches the operating system.

If you want a USB that you can plug into a machine that is already running, that has an active operating system like Manjaro or Windows or whatever, then have it start running Debian, like you would an Appimage or a Windows .exe program saved to a USB, that is not possible except maybe with a virtual machine program like Virtual Box or Qemu.

USB drives were not intended to be used as drives that run operating systems. It can be done, but it is not simple and can cause a lot of errors.

What do you need the USB for? If you can explain what you are trying to achieve with more detail, there might be ways to do it differently.

directly onto my USB

directly without having to reboot to run the installer?

You use “directly” three times. Remove all instances of the word from your post and reread it. Does the post make sense to you still? Does it have the same meaning?

I am not trying to be a dick, I want to make sure the word does not have a meaning I am not aware of in this context or if Linux is installable to a USB drive ‘indirectly’ but that does not make sense to me.

Can you rephrase what you are trying to do?

One way to allow for this would be a license that says if you sell them through an LLC or corporate entity of some kind, that should require financial support but if it’s you selling them in your own name or as a single owner business, with your reputation and liability on the line, then you should not be required to provide support. The other thought to include in a license is actual money earned from sales. Once a company earns, for example let’s say $1,000 or 1,000€ a month in profits, that’s when the financial support license kicks in and requires payments to the open source authors. Of course, that would require high earners to report their earnings accurately which is a different can of worms.

yeah that looks exactly like what i wanted, thanks! i probably should have asked my question a couple years ago but i was still very new to linux and didn’t quite know the lingo. i’m still not quite sure how < works in general but i get the pipe and other redirects at least.

putting it in .bash_logout doesn’t always work. something involving login shells i don’t quite understand yet but i’ll read more about it. i saw mention of putting exit_session() { . "$HOME/.bash_logout" } trap exit_session SIGHUP in .bashrc to make it always work but i also don’t understand trap yet either so i’ll look into that too.

thanks again, your reply helped point me in the right direction of things i want to learn!

is there a way to save commands from history? i tried to figure this out when i was starting to use linux regularly, to help learn commands and to make a reference for myself as to what the commands do. i’m familiar with things like man, info, tldr and others but i wanted to put things in my own words since i remember better that way.

what i’m wanting but can’t seem to automate: -save commands from bash history to a file with only the command and arguments used, no line numbers or time stamps. -filenames can be kept, but if filenames are removable easily, that would be better. -file saved in should have the list sorted with any duplicates removed and happen after any terminal session ends. -i’ve read about changing the prompt but not done it correctly and not sure if possible or the safest way. -i’ve tried using .bash_logout but it doesn’t seem to do anything and i’m not sure why.

this isn’t too important anymore, as i’ve grown more comfortable with linux and bash but it bugs me that i never got it to work. i can copy and paste more detailed notes of what i tried but i’d need to redact a bunch of cursing and frustrated whining.

This setup isn’t what I use, i had wanted to try as many monitors that i had ports for and this was one result that worked.

2 Sharp 18" tv’s at 60Hz, different models and one can’t do higher than 1280x720p so it was scaled 125%

LG ultrawide 34" 100hz

Asus 27" 75Hz

Samsung 42" tv scaled to 75% but I couldn’t get its refresh rate to change. it’s supposed to do 120Hz but i only get 60 Hz

since switching to wayland, i rarely have monitor problems and i love it, especially after switching to an AMD GPU. i had constant issues from my previous nvidia card.

side note, i’m super poor and all of these except the LG were given to me by friends who no longer had use for them. many of these friends do website design and ask me how their sites look occasionally. they can emulate different screens i think but they’re probably trying to show off or they know i have a huge variety of screens i can test things with. I have at least 6 other monitors from 4 different brands in 3 sizes and 3 different native resolutions with 2 that do rates other than 60Hz. two are CRT’s. now i’m probably trying to show off.